Toilet overflow

For Immediate Release

Toilet Guardian is an electronic water saving device that shuts off water to the toilet when a leak or overflow is detected. Emergency or cost savings, this automatic shut off valve saves water and stops water damage. The first generations were commercial and sold directly to hospitals, senior living facilities and municipalities. Now for the first time, they are available to the public. 

The basic design of a toilet carries with it several inherent problems. A clogged toilet will obviously overflow, but toilets often leak, unnoticed, wasting hundreds and even thousands of gallons per day of drinking water. Look up the number one cause of high water bills and, even the EPA agrees, it is the toilet. Small ‘silent’ leaks can waste hundreds of gallons per day and stuck open flappers or fill valves can waste thousands of gallons per day. The Toilet Guardian stops the loss. 

The eco-smart valve easily attaches between the water supply line and the tank. Two small sensors work in tandem or separately to completely surround the toilet with protection from tank to bowl. Flapper and fill valve leaks, stuck flappers, rusted bolts, cracked tanks and especially clogged toilets; they are the same to the Toilet Guardian-problems.

“The Toilet Guardian is state of the art and the industry response has always been great. However, what we need now is the public to get excited about the product. With the rising cost of water it seems like the natural transition. While eliminating overflows is great, the water savings is phenomenal.”  - David M. Parrish, Chief Operating Officer

For more information regarding Toilet Guardian visit Aquaone.com or call (714) 898-7016.

What if All U.S. Toilets were flushed at the same time? BOOM The end of the world as we know it?

Apparently there would be a few noticeable challenges such as an apartment building that might backup a bit. There would be a few issues but it would not be the end of the toilet world as we know it.

Since water is being held in the tank pre-flush, the bigger problem would be refilling the tanks all at once. All the low water pressure, it might take a bit of time.

Live Science wrote this post referencin  Michael Johnson, a civil engineer at the Utah Water Research Laboratory.  For the whole TOO MUCH IMFORMATION TMI Article check it out here.

 

How To Prevent a Toilet Overflow, Install Toilet Guardian

by David M. Parrish on March 23, 2012

Toilet Guardian

Toilet Guardian

You can now prevent annoying toilet overflows with the Toilet Guardian TG-1000, the unit that turns a toilet into a smart device. The Toilet Guardian smart valve attaches between the water supply tube and the tank with two sensors, one in the tank and one in the bowl. The Toilet Guardian monitors changing water levels in the tank and bowl and will shut off the water if any excess water loss occurs, including toilet overflows.

It happens all the time, toilet overflows. If they happen while you are in the house it’s annoying but not overly damaging. However once in awhile they happen as you’re leaving the house, you come back to absolute mess. A lot people find the Toilet Guardian after some major damage occurs from an overflowing toilet, a second story apartment, a vacation property, an investment property.

The Toilet Guardian fits any tank type toilet (including pressure assisted) and it only takes minutes to install! Read More or go right to our Testimonials page. Features include ceramic disc valve with over 500, 000 life cycles.

For more information, purchase or distribution please visit Aquaone.com or call (714) 898-7016.

 

Toilet Overflows Now Have A Computerized Solution

by David M. Parrish on February 22, 2012

Toilet Overflow are the most annoying and embarrassing events to any home owner. What about if you’re visiting someones home? ACK!

Toilet Guardian actually solves this problem before it happens. The unit connects to the valve at the back of the toilet while 1of 2 sensors is located in the bowl. When the unit senses an overflow is about to happen the unit actually shuts the water off at the source stopping the annoying overflow.

The system also will shut off the water when there is a silent leak. Once the unit inside the tank senses a inconsistent pattern from a stuck open flapper or a leaking flapper then the unit will also shut off the water.

When you look around at preventive solutions, look no further and please feel free to share this post and look around the website.

Let us know what you need to know to make a decision. Your feedback can help us

Reduce your monthly water bill up to 20% per month…EVERY MONTH !!!!SAVE WATER NOW! TOILET GUARDIAN

  • Eliminate water loss from stuck open flappers.
  • Eliminate water loss from leaky fill valves.
  • Eliminate water loss from leaky flappers.
  • SPECIAL BONUS:  Eliminate Toilet Overflows FOREVER.

The Toilet Guardian is the third generation of electronic water valves that reads the changing water levels in the tank and bowl and shuts off the water when a problem is detected. It fits any tank type toilet (including pressure assisted) and it only take minutes to install !  Read More or go right to ourTestimonials page. Features include ceramic disc valve with over 500, 000 life cycles.

NO water hits the floor, no water gets wasted.

Your water bill comes down.

No other valve offers you complete protection.

No other valve offers you complete peace of mind.

Protect your investment, protect your health and never worry again about your toilet.

100% ROI is possible in the FIRST year or the FIRST prevented overflow.

Don’t wait because  accidents don’t wait either !!


Toilet Guardian-TG 1000

by David M. Parrish on January 25, 2012

BUY NOW!

∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫

No More Toilet Overflows,

No More High Water Bills

Because of Leaks and Stuck Open Flappers!

NO WATER HITS THE FLOOR WITH THE TOILET GUARDIAN!

WE STOP THE $$$ LOSS WHEN LEAKS OCCUR !!!

The Toilet Guardian is an electronic water valve that reads the changing water levels in the tank and bowl then shuts off the water to the toilet when a problem is detected.

It only takes minutes to install. Simply turn off the water to the toilet, remove the fill line from the fill valve, attach the Toilet Gurdian to the fill valve, reattach the fill line, turn the water back on and your toilet is operational again. Next install the small bowl sensor to the seat bolt for overflow protection. Last hang the tank sensor in the tank for leak detection and you are ready to start saving money and protecting your property. In under 10 minutes your protection is complete.

The system comes in three models:

1. TG 1000 A -offers complete protections including bowl overflow elimination and water conservation
2. TG 1000 B – bowl overflow elimination only.
3. TG 1000 T – water conservation and leak detection only.

Go right to the AquaOne Library to download and view Toilet Guardian Install Specification Sheets. Guides, User Manuals, Videos and more are also available for viewing and downloading.

READ MORE

Toilet Guardian Videos: YouTube

by David M. Parrish on January 1, 2012

  1. The cost of water waste and damage potential from toilets.
  2. Complete Installation Video of the dual sensors and shut-off valve.
  3. Quick Guide to the auto shut off features.